PlainBulkTshirt — Plain T-Shirts Wholesale India

DTF vs DTG Printing — Which is Better for Blank T-Shirts?

27 October 2026 · 6 min read

The short answer

DTF (Direct-to-Film) and DTG (Direct-to-Garment) are both popular digital printing methods for t-shirts in India. DTF is generally better for small runs, vibrant colours on dark garments, and non-cotton fabrics. DTG is better for high-volume all-over prints and very fine gradient artwork on 100% cotton.

How DTF printing works

In DTF printing, the design is printed onto a special PET film using a modified inkjet printer loaded with DTF inks. A hot-melt adhesive powder is then applied to the wet ink and cured. The finished transfer film is pressed onto the t-shirt with a heat press at around 160°C.

The result is a layer that sits on top of the fabric — you can feel a slight texture on the print. DTF transfers can be applied to cotton, polyester, blends, nylon, and leather.

How DTG printing works

DTG printing uses a large-format inkjet printer that prints directly onto the garment as it sits on a platen. The ink is absorbed into the fabric fibres.

DTG works best on 100% ring-spun cotton with a GSM of 180–220. Dark garments require a white underbase ink layer (pre-treatment) before the colour pass, which adds time and cost. The final print is very soft — it integrates with the fabric rather than sitting on top.

Print quality comparison

For fine gradients and photographic prints, DTG produces slightly better results because the ink blends into the fabric. DTF prints have sharper, more opaque edges — which is ideal for logos and flat-colour artwork but can look slightly plastic on very fine gradients.

For vibrant colours on black or dark t-shirts, DTF often produces brighter results because the white underbase is printed as part of the film, not as a separate pre-treatment step.

Minimum order quantity

DTF: Practically no minimum — you can print a single transfer for ₹30–50 and press it in 30 seconds. This makes DTF ideal for sample orders and personalisation.

DTG: Also low MOQ, but the setup time per garment (loading platen, pre-treatment, print, cure) means DTG is most efficient at 5+ identical pieces per design.

Cost per piece

DTF is typically cheaper for small runs and for printing on dark garments. A typical A4 DTF transfer costs ₹40–80 depending on coverage, and pressing takes 30–45 seconds.

DTG cost per piece is higher for dark garments (pre-treatment + double ink pass) but competitive for light garments at higher volumes.

For a 50-piece run on white 180gsm t-shirts, DTG and DTF are roughly comparable in cost. For 10 pieces on black t-shirts, DTF is usually cheaper.

Which fabric should you buy?

For DTF: Any plain t-shirt works — cotton, polyester, or blends. Our 180gsm cotton blanks and 220gsm oversized tees are both compatible.

For DTG: Stick to 100% ring-spun cotton, 180gsm or above. Avoid polyester blends above 20% — the ink does not bond well with synthetic fibres.

In both cases, pre-wash your blanks before printing to remove sizing agents and prevent post-wash shrinkage from distorting the print.

Shop related blanks

Ready to order plain blanks?

Browse ready-stock catalogue with live inventory and bulk pricing.

View catalogue →

More buying guides