PlainBulkTshirt — Plain T-Shirts Wholesale India

Plain T-Shirts for Sublimation Printing in India

1 November 2026 · 4 min read

Why sublimation needs polyester fabric

Dye-sublimation printing works by converting solid sublimation dye into gas under heat and pressure. The gas bonds permanently with polyester fibres at the molecular level — the dye literally becomes part of the fibre.

Cotton fibres do not have the same chemical receptors as polyester. Sublimation ink on cotton will look acceptable initially but fades dramatically after 2–3 washes, leaving a ghost of the original print.

Minimum polyester content for acceptable sublimation: 65%. Ideal: 95–100% polyester.

White is mandatory for sublimation

Sublimation dye is transparent — it colours the polyester fibres without adding an opaque layer on top. On a white fabric, the colours appear as printed. On a coloured fabric, the base colour mixes with the dye colour.

Blue sublimation ink on a red t-shirt will look brownish-purple. Yellow ink on a blue t-shirt will look green. There is no way to print light colours over dark base colours with sublimation.

For any sublimation project, start with white or very light grey fabric. White gives the most accurate colour reproduction from your ICC profile.

GSM for sublimation t-shirts

Sublimation polyester fabric is typically 120–160 GSM. This is lighter than the 180 GSM cotton standard for screen printing.

The lighter weight is because polyester is inherently more rigid than cotton at the same GSM — a 160 GSM polyester tee does not feel as flimsy as a 160 GSM cotton tee.

Avoid very lightweight sublimation fabric below 110 GSM — it feels cheap, distorts during heat pressing, and the thin fibres hold less dye, producing duller colours.

Heat press settings for sublimation

Sublimation requires precise heat press settings:

• Temperature: 180–200°C (higher than plastisol curing) • Time: 45–60 seconds • Pressure: medium-firm

Too low temperature or too short time: incomplete dye transfer, washed-out colours. Too high temperature or too long time: polyester fibres can scorch, producing a shiny, flattened surface or a yellowish tinge.

Always do a test press on the specific blank you are using before starting a production run.

All-over-print (AOP) sublimation vs placement

There are two types of sublimation t-shirt projects:

• Placement sublimation: print applied to a specific area (chest, back, sleeve) of a finished t-shirt. Requires a standard finished sublimation blank and a heat press large enough for the print area.

• All-over-print (AOP) sublimation: the fabric panels are printed before the t-shirt is cut and sewn. This requires unfinished sublimation fabric or cut-panel blanks — not standard finished t-shirts.

If you want edge-to-edge printing, you need AOP panels. A standard sublimation t-shirt cannot produce a true all-over print with a flat heat press — the seams and collar prevent complete coverage.

Our sublimation blank

We stock a 100% polyester sublimation t-shirt in white. It is designed specifically for placement sublimation printing — chest, back, and sleeve print areas.

For all-over-print sublimation projects, we recommend contacting us to discuss panel options or using our oversized cotton styles for non-sublimation methods (DTF or screen print).

Check the products page for current sublimation blank availability and pricing.

Shop related blanks

Ready to order plain blanks?

Browse ready-stock catalogue with live inventory and bulk pricing.

View catalogue →

More buying guides